Disassembling The Film Take-Up Mechanism Assembly (4-1) - FujiFilm PROFESSIONAL GW690-III Service Manual

DISASSEMBLY
FUJI GW690-III (PROFESSIONAL)/FUJI GSW690-III (PROFESSIONAL)
6. Disassembling the film take-up mechanism assembly (4-1)
6-1 Remove two screws (4-94) and screw (4-109), remove the dial (4-95) and spacer (4-96), and
unhook the springs (4-81 and 4-5) from the guide shaft (4-44).
6-2 Remove the screw (4-92), nut (4-75) (left hand thread) and gear (4-76) (left hand thead),
pull out the dial assembly (4-93) and rotary plate assembly (4-77), unhook the spring
(4-101) from the stopper pin (4-104), pull out the gear assembly (4-60), remove the spring
(4-87) and screw (4-86), and remove the lever assembly (4-88).
6-3 Remove two screws (4-46), remove the rack assembly (4-47) and spring (4-50), remove the
screw (4-40), and remove the ratchet wheel assembly (4-66).
6-4 Remove four screws (4-2), remove the base plate (4-3), and pull out the gear assembly
(sleeve assembly (4-6), gear (4-9), washer (4-10), ratchet wheel (4-11), and disc assembly
(4-12)). Next, remove the screw (4-21), and pull out the gear assembly (4-32).