REASSEMBLY AND ADJUSTMENT
FUJI GW690-III (PROFESSIONAL)/FUJI GSW690-III (PROFESSIONAL)
3-7
Installing the camera back assembly (6-1)
Make sure that the pressure plate (6-22) and rollers (6-23 and 6-25) are installed correctly
and they operate normally, and then, install the camera back assembly (6-1) with three
screws (1-6).
After installing the camera back assembly, open and close it two to three times and make
sure that the camera back can be opened and closed smoothly and that the camera back is
locked and unlocked correctly.
-44
-