Table of Contents
Advertisement
UNLOADING THE FILM
1. Exposing the last frame and unloading the film
(Fig. 33)
After exposing the last frame, the film will automatically
wind itself up to the very end and the letter "E* will appear
in the LCD.
Make sure the "E" Sign appears in the LCD, then open the
Camera Back and take out the exposed film.
To prevent the film from loosening, seal it tightly with the
End Seal.
2. Unloading the film in mid-roll (Fig. 34)
Press in the Mid-roll Wind-up Button on the camera bot-
tom. The film will wind itself up to the very end then stop.
When winding is completed, the "E" Sign will appear in the
LCD.
Ill. ADVANCED TECHNIQUES
APERTURE-PRIORITY AUTO EXPOSURE
1. Set the Selecting dial to "A" (Fig. 35)
If you set the Select Dial to A, while pressing down the
Select Dial Lock Button, your camera will be set to the ap-
erture-priority AE mode.
2. Set the aperture (Fig. 36)
Tum the Up/Down Dial until your desired aperture ap-
Page 34.)
e If the Shutter Release is depressed with the "InF* Sign
blinking, the Lens will focus on infinity.
e When the distance indicator flickers all the time, your
camera is in the MF (manual focus) mode. Set it to the
AF mode. (Refer to Page. 23.)
9. Trip the shutter (Fig. 31)
Press the Shutter Release about halfway down and check
the composition, distance and exposure. If they are good,
take your picture by gently pressing the Shutter Release
all the way down. When the shutter trips, an electronic
buzzer "beep" will sound.
10. When the last frame is reached (Fig. 32)
If the film is positioned for the last shot, an electronic
buzzer will sound six times to tell you that the film has
reached the last frame.
* When using the cable release, this halfway-down mode
is not possible. Be careful to make one positive shutter
pressing to operate the distance, exposure and shutter
tripping.
* ן ו the sound of the electronic buzzer is worrisome, you
can switch it off. For details, refer to "Extra functions" on
page 33.
Advertisement
Table of Contents
