Kenwood TM-201A Instruction Manual page 3

1. FEATURES
¢ Compact, slim transceiver for
easy mobility
¢ Microcomputer provides
multi-frequency control
functions
© Dual function keyboard
facilitates memory recall (MR)
¢ High reliability by using PC
boards for each unit; high
sensitivity (12 dB SINAD
0.22 uV) front-end using
GaAs FETs
© Quality sound for transmission
and reception
¢ HI/LOW switch controls output
power
© Repeater operation
¢ Extended frequency range*
1. Coaxial connector with cable greatly reduces effective depth when connec-
ting an antenna cable.
2. External speaker system allows installation in any place.
3. Remote frequency control unit (FC-10) extends your operation facility,
. Five channel memories plus COM* channel can be recalled at will.
. ALERT function monitors memory channel 1 (M1).
. Memory scan operation (MS) from memory channels 1 through 5.
. Programmable scan within the frequency range selectable.
. 1 MHz step-up function (MHz).
. VFO A in 5 kHz (25 kHz; for European and British versions) steps; VFO B in
5 kHz steps.
7. Beeper indicates each of 7 modes.
aahWN—
ee ee |
Uy i |
Eieh
y POWER/VOL SQUELCH
a
. External communications speaker, 77 mm in dia., supplied.
2. Maximum 3% modulation distortion ensures good quality transmit signal.
1. COM"* system facilitates access to repeaters with the TU-3 unit* (option) in-
stalled.
2. The TU-3 2nd tone frequency (one of 37 frequencies selectable) intercon-
nected with the TX OFFSET system enables access to a repeater.
3. The REV switch monitors direct signal.
Covers 142.0~ 149.0 MHz in 5 kHz steps.
* European and British versions excluded.