Kenwood TM-201A Instruction Manual page 12

@ FIXED STATION INSTALLATION [general]
¢ Power supply A regulated DC power supply (13.8 V DC, 5.5 A or more) is required.
It is recommended that the TRIO-KENWOOD PS-430 be used for a power sup-
ply.
Use of the PS-430
eat PS-430 NOTE:
a Preferably, voltage should
q be adjusted to 13.8 V DC.
if = = Current capacity is more
NAN | i ill ll °s co) than 5.5 A.
| . The regulated supply should
(oO) be equipped with a built-in
UI il |
iL WW IN! protection circuit for both
TM-201A overcurrent and over-
voltage.
CAUTION
\ A battery charging power
Fuse supply cannot be used.
OA:
OOO
og @ . @
TM.201A >)
e Antenna Various types of fixed station antennas are commercially available, select your
desired antenna according to your installation space and application.
Note that the SWR of your antenna should be less than 1.5. A high SWR will
cause the TM-201A protective circuit to operate, reducing the transmit output
power.
largely on the type of antenna used.
For fixed station operation there are
ground plane antennas (omni-
directional) and Yagi antennas (uni-
directional). The Yagi antenna is
suitable for long distance operation
(DX) or communication with a
specific party.
(having excellent directivity and
antenna is generally used for local
operation.)
Ground plane
antenna
Rotor Control cable
12