Kenwood TM-201A Instruction Manual page 21

@ GENERAL INFORMATION
M HOW THETX FINAL MODULE IS PROTECTED
M@ BATTERY PRECAUTION
Your TM-201A has been factory aligned and tested to specification before
shipment. Under normal circumstances, the transceiver will operate in accor-
dance with these operating instructions.
Attempting service or alignment without factory authorization,
Final module protection is provided by sampling the reflected power. As the
reflected power is increased (higher SWR) transmitter drive is reduced, thus
decreasing input to the final module. This in turn reduces collector loss, protec-
ting the final transistor.
@ ORDERING SPARE PARTS
@ SERVICE
When charging your vehicle battery, or when jumpstarting a dead battery,
ALWAYS disconnect the power cable from the back of the transceiver.
specify the following:
Note:
21