Kenwood TM-201A Instruction Manual page 19

6. ACCESSORIES
@ USE OF THE REMOTE FREQUENCY CONTROL (OPTION)
(5.00082 lee
) @
Frequency display: Indicates in four digits.
Example: Indication 5 8 c MHz denotes 145.0 MHz.
ALERT display: During ALERT operation, the (#) lights.
VFO A/B: (Ff) denotes VFO A; (&) denotes VFO B.
G) denotes COM* operation; (1 — 5) denotes memory channel 1 — 5.
Scan display: Flashes during scan operation.
In memory scan, memory address is displayed at @).
In programmable scan, (4) or (&) is displayed at @).
1) Display (The following
numbers correspond to
those in the figure above.)
© ©© O
©
MHz key: When used, the VFO displayed frequency is shifted up in 1 MHz
2) Keyboard steps.
MR key: This key has two functions: Memory recall; and COM" recall.
©
OM* M12 Ms oerrerree + M5:
Com ei
* European and British versions excluded.
@ PS-430 POWER SUPPLY