Advertisement
Available languages
Available languages
'Ofoyalar=readialem eats)
£5) (180)
1 MeOxelalatstea (late tale¥es]
ol:t2 1165
Note
Once the speakers have been connected, move SPEAKERS
selector (on the front panel) to A, B or A + B setting.
When using the headphones, set the SPEAKERS selector to
OFF.
Set the SPEAKER IMPEDANCE SELECTOR according to the
impedance of the used speakers, using a screwdriver
CAUTION:
When you operate two speaker systems simultaneously, be
sure to use the speakers with the impedance of more than 8
ohms and set the SPEAKER IMPEDANCE SELECTOR to
4-69.
Speaker impedance and power capability
2 MAUriiatew emeluhat-nes
Receiver
©000lm.
Connect the AC power cord of each piece of equipment to
the AC outlet on the receiver so that you can turn the
equipment on and off using the receiver's POWER switch.
Caution
Advertisement
