Advertisement
Available languages
Available languages
(0)
24
USER STD
SONY
STD {Tl LEARN
aye
Approx. 5 cm
(2 inches)
USER STD
SONY.
STD
LEARN
=
The RM-P303 learns various functions of other remote
commanders emitting infrared rays and allows you to control
most of audio and video equipment from a distance.
1
Set the mode selector to LEARN.
2
Program a signal.
@ Press and hold the button which shall "learn" the
remote-control signal until the LEARN indicator
lights up.
@® Press and hold the button of other manufacturer's
remote commander whose signal is to be learned.
@® Remove your finger(s) from the button(s) after the
LEARN indicator goes off.
The two remote commanders must:
e face straight each other.
e be placed at a distance of approx. 5 cm (2 inches).
e not be moved during programming operation.
3
Repeat operation for each button to be programmed.
4
Set the mode selector to USER STD or SONY STD.
After programming
Be sure to test if the equipment really works with the
programmed signals.
Number of signals that the commander can learn
:
It depends on the format of the signal. If you program signals
of Sony equipment, approximately 50 - 60 signals can be
programmed.
-
Advertisement
