Advertisement
Available languages
Available languages
—=—~
eS
STEREO indicator flickers or does not
appear when receiving stereo :
programs.
'
A very weak FM station or a noisy FM
program is received.
Adjust the antenna or connect an
external FM antenna.
Press the FM MODE button to
disengage the stereo mode.
Adjust the antenna.
Tune in the station with the Manual
Tuning system. (See page 18.)
The desired station cannot be found
during Automatic Tuning.
The signal strength is too weak for
Automatic Tuning.
The stations have not been
memorized.
| Preset stations cannot be tuned in.
Memorize the stations. (See page 18.)
AM station cannot be tuned in.
The AM tuning interval is set
incorrectly.
Change the tuning interval according
to the AM frequency allocation
system of your country.
(See page 5.)
Connect the equipment correctly.
(See page 7.)
Turn the TV on.
Replace the batteries with new ones.
Remove the object.
VCR, TV tuner or TV connection is not
correct.
| Picture does not appear.
The TV is not turned on.
The remote commander does not
The batteries are exhausted.
operate.
There is any object between the unit
and the commander head.
27
Advertisement
