Sony STR-GX80ES Operating Instructions Manual page 23

fo{stomm F-lel=m melliiare)
1 Turn on the receiver and the equipment to be used.
2 Select the playback side VCR with the FUNCTION
selectors so that VIDEO MONITOR indicator of the
program source to be recorded lights up.
POWER -+ ON
3 Select VIDEO with REC OUT SELECTOR.
4 Set the recording side VCR to the recording mode.
5 Set the playback side VCR to the playback mode.
You can listen to another program source during video tape
editing by selecting FUNCTION selectors.
Playback-side V O R
recording side VCR
(for playback) '
am. Audio signals
> Video signals
sVololiaremn (cay morelelaceme)om- mm alel-xomm ici ex-melelalatem -telidiare)
uring video tape editing, you can replace the sound previously recorded on a video tape with sound from another audio
ource, thus making your own personalized video tape.
1 Turn on the receiver and the equipment to be used.
2 Select the playback side VCR with the FUNCTION
selectors so that the indicator of the program source to
be recorded lights up.
POWER + ON
3 Insert a recorded tape into the playback side VCR and
set it in the playback mode.
4 At the point where audio dubbing is to start, press the
pause button on the playback side VCR.
5 Select the audio program source with REC OUT
SELECTOR.
6 Release the pause mode of the playback side VCR and
set the recording side VCR to the recording mode.
Monitor TV | _DATdeck | deck
7 Start playing the selected program source.
am. Audio signals
&- Video signals
23