Nellcor N-180 Service Manual page 61

Section 6: Disassembly Guide 」
8. Ifthe AC filter lacks a ground wire, remove the filter and solder a
ground wire on the filter lug (a 2-inch length of wire is included in the
AC filter replacement kit). Follow the instructions for removing and
replacing the AC filter as given in this section.
4 5 10)
Note: 110V transformers
do not have these cores
027957A/05-1
Secure wire inside ——
hole before soldering.
AC filter (part
of AC inlet)
Detail A
27957A/05-2
Figure 6-5: Transformer and AC Filter Details
9. Position replacement transformer on studs.
67