AUTODOME IP starlight 5100i Table of contents | en Table of contents Introduction Establishing the connection Configuration with Project Assistant app Password protection in camera System overview Live page Playback Configuration Dashboard Operation via the browser Live page 3.1.1 Connection 3.1.2...
Page 4
| Table of contents AUTODOME IP starlight 5100i 7.1.1 Positioning Scene Mode 7.2.1 Color 7.2.2 7.2.3 Enhance 7.2.4 Scene Mode Scheduler Encoder Profile Encoder Streams Encoder Statistics Encoder Regions Privacy Masks Lens Settings PTZ Settings 7.10 Pre-positions and Tours 7.11...
Page 5
AUTODOME IP starlight 5100i Table of contents | en 10.4.3 SNMP = SNMP v3 10.5 Multicast 10.6 IPv4 Filter Service 11.1 Maintenance 11.2 Licenses 11.3 Certificates 11.4 Logging 11.5 Diagnostics 11.6 System Overview AUX Commands Troubleshooting 13.1 Rebooting the unit 13.2...
You can also use the Project Assistant app to complete the initial configuration of the camera. In order to use this device with the Project Assistant app by Bosch, you must download the app from the Bosch Download Store, from Google Play, or from the Apple Store.
Page 7
AUTODOME IP starlight 5100i Introduction | en Fill in the fields User name and Password. Click OK. If the password is correct, the desired page appears. Bosch Security Systems 2020-11 | draft 0.9 | User Manual...
Configuration Configure the device. Dashboard See detailed system information. Links Navigate to the Bosch download store. Logout Log out of the device. Help on this page? Get context-sensitive help for the page that you are seeing.
AUTODOME IP starlight 5100i System overview | en Icon Description Function Start Video Security App Start the app and use It to view live images, to configure and to operate the device from any location. Show latest event Open the Playback page to see the last recorded important events.
| Operation via the browser AUTODOME IP starlight 5100i Operation via the browser Live page 3.1.1 Connection Stream 1 Select this option to display stream 1 of the camera. Stream 2 Select this option to display stream 2 of the camera.
AUTODOME IP starlight 5100i Operation via the browser | en Select the appropriate pre-position (1 through 6). Click to store the pre-position. Note: If the pre-position is already stored, a dialog box displays the message, “Overwrite current pre-position?” Click OK to overwrite, or click Cancel to cancel the operation.
| Operation via the browser AUTODOME IP starlight 5100i Night mode Click this button to activate/deactivate night mode for the camera. After a few seconds, the camera switches modes. IR light Click this button to turn on the infrared (IR) light of the illuminator accessory (if available on your camera).
AUTODOME IP starlight 5100i Operation via the browser | en – Saving begins immediately. The red dot on the icon indicates that a recording is in progress. Click the recording icon again to stop recording. 3.1.12 Video Security App Start Video Security app To start the Video Security app, click 3.1.13...
| Operation via the browser AUTODOME IP starlight 5100i Communication error A communication error, such as a connection failure to the storage medium, a protocol violation or a timeout, is indicated by this icon. Indicates a gap in the recorded video.
AUTODOME IP starlight 5100i Operation via the browser | en Select a track in the track list or in the search results. The start and stop date and time are filled-in for the selected track. If required, change the times.
A check mark in this check box indicates that at least one certificate is loaded onto the camera. If no certificates are loaded, then “No certificate installed” appears to the right of the text. The Escrypt certificate is a root certificate for Bosch Security Systems that proves that the device meets the following criteria: –...
AUTODOME IP starlight 5100i General | en The device has three authorization levels: service, user, and live. – service is the highest authorization level. Entering the correct password gives access to all the functions and allows all configuration settings to be changed.
| General AUTODOME IP starlight 5100i Daylight saving time The internal clock can switch automatically between normal and daylight saving time (DST). The unit already contains the data for DST switch-overs for many years in advance. If the date, time and zone have been set up correctly, a DST table is automatically created.
Page 19
AUTODOME IP starlight 5100i General | en Logo To place a logo on the image, select and upload an uncompressed .bmp file with a maximum size of 128x128 pixels and 256 colors to the camera. Its position on the image can then be selected.
Page 20
| General AUTODOME IP starlight 5100i Specify the exact position (Position (XY)). In the Position (XY) fields, enter the values for the desired position. Title region Select On to set or to edit the position of the title region on the OSD.
AUTODOME IP starlight 5100i General | en GB/T 28181 This page allows you to set the parameters for conformance to the GB/T 28181 national standard “Security and protection video monitoring network system for information transport, switch and control”. This standard is specifically for China.
| Web Interface AUTODOME IP starlight 5100i Web Interface Appearance You can adapt the appearance of the web interface and change the website language to meet your requirements. You can use GIF or JPEG images to replace the company and device logos. The image can be stored on a web server.
AUTODOME IP starlight 5100i Web Interface | en – Green: Fields, lines and routes used in a task are displayed in green. They can be edited but not deleted. – Red: Fields, lines and routes currently in alarm mode are displayed in red.
Page 24
| Web Interface AUTODOME IP starlight 5100i Auto logout time [min] Set a time frame (in minutes) for the automatic logout. Default value is 0 (no automatic logout). Show alarm inputs Select this checkbox if you want the alarm inputs to appear in the Digital I/O section of the Live page.
This field identifies any cloud-based services with which the camera communicates. – If you have registered the device on a cloud-based service such as Bosch Remote Portal, then this field identifies this fact (“Connected”). Note: The button () to connect to the device with that service is active.
Page 26
| Connectivity AUTODOME IP starlight 5100i Enable DynDNS A dynamic Domain Name Service (DNS) allows you to select the unit via the Internet using a host name, without having to know the current IP address of the unit. You can enable this service here.
AUTODOME IP starlight 5100i Camera | en Camera Installer Menu Sensor mode The sensor mode specifies the base resolution and frame rates for the image quality settings. Fast moving scenes use more frame rates (50 fps or 60 fps) for better image quality than slow moving scenes.
| Camera AUTODOME IP starlight 5100i 7.1.1 Positioning The Positioning feature describes the location of the camera and the perspective in the camera’s field of view. Perspective information is essential to Video Analytics, as it enables the system to compensate for the illusory smallness of distant objects.
Page 29
AUTODOME IP starlight 5100i Camera | en Notice! The Sketch functionality is only available for configured and assigned pre-positions. For AUTODOME and MIC cameras, configure the pre-positions of the camera and assign the pre-positions to one of the available 16 VCA profiles before calibration with Sketch.
Page 30
| Camera AUTODOME IP starlight 5100i – Enter the real size of a line or angle. To do this, select the line or angle, then enter the size in the corresponding box. Example: You have placed a line on ground across the lower side of an automobile.
AUTODOME IP starlight 5100i Camera | en Latitude Latitude is the north-south position of the camera in the spherical coordinate system WGS 84. Longitude Longitude is the east-west position of the camera in the spherical coordinate system WGS 84. Ground level [m] The elevation of the ground above sea level.
Page 32
| Camera AUTODOME IP starlight 5100i Saturation (0...255) Adjust the color saturation with the slider from 0 to 255. White balance Select the appropriate white balance mode from the drop-down list. – Basic auto mode allows the camera to continually adjust for optimal color reproduction using an average reflectance method.
AUTODOME IP starlight 5100i Camera | en R-weight When White balance is in an auto mode, and RGB-weight white balance is On, this field appears. Adjust the slide for red-gain weight (from -5-0 to +50, with 0 as the default).
| Camera AUTODOME IP starlight 5100i – Select Fixed exposure to set a fixed shutter speed. Select the shutter speed for fixed exposure. (The values available depend on the value set for the ALC mode.) Maximum shutter [s] Select a value in this field as the maximum speed of the shutter when the camera is in Automatic exposure mode.
Page 35
AUTODOME IP starlight 5100i Camera | en – Off - stops High dynamic range, and enables features such as fixed shutter and BLC. – HDR X - Motion optimized - This mode optimizes focus on objects in fast motion in the scene.
| Camera AUTODOME IP starlight 5100i Intelligent streaming The sharpness level, Temporal noise filtering and Spatial noise filtering can be automatically adjusted here, through the encoder, for optimum intelligent streaming results. Dynamic sharpness & noise filtering Enable or disable the automatic adjustment of the encoder.
Page 37
AUTODOME IP starlight 5100i Camera | en – Off: bit rate optimization is disabled – Maximum quality – High quality – Medium – Low bit rate – Minimum bit rate Maximum bit rate This maximum bit rate is not exceeded under any circumstances. Depending on the video quality settings for the I- and P-frames, this fact can result in individual images being skipped.
| Camera AUTODOME IP starlight 5100i frame (QP value), the higher the encoding quality (and thus the best image quality) and the lower the frame refresh rate depending on the settings for the maximum data rate under network settings. A higher quantization value results in low image quality and lower network load.
AUTODOME IP starlight 5100i Camera | en Non-recording profile Select one of the following profiles for each stream: Note: Non-recording profiles (streams) are I-frame only. Note: Each stream can have its own independent profile which does not need to be shared with other streams.
| Camera AUTODOME IP starlight 5100i Use the mouse to define the area (shape) that the region covers and to position the area (shape) in the preview of the video image. – Drag the center, corner points, or sides of the shaded area (shape).
AUTODOME IP starlight 5100i Camera | en – One Push (default; commonly called “Spot Focus”): activates the Auto Focus feature after the camera stops moving. Once focused, Auto Focus is inactive until the camera is moved again. – Auto Focus: Auto Focus is always active.
Page 42
| Camera AUTODOME IP starlight 5100i Select Off to hide azimuth/elevation readings. Proportional speed Select On to increase Proportional speed. Select Off to decrease Proportional speed. Proportional speed mode Options are Super Slow, Slow, Medium, and Fast. Maximum pan speed [%] Select the maximum pan speed (in percent).
AUTODOME IP starlight 5100i Camera | en – Click the Clear button to reset the North point to factory defaults. A dialog box appears with the message, “Reset North point to factory defaults?” To confirm, click OK. To cancel, click Cancel.
| Camera AUTODOME IP starlight 5100i To remove a pre-position from the tour, select the pre-position in the list and uncheck the box Include in standard tour (marked with *). Select a dwell time from the drop-down list Standard pre-position tour.
AUTODOME IP starlight 5100i Camera | en 7.13 Audio Audio You can set the gain of the audio signals to suit your specific requirements. The live video image is shown in the window to help you check the audio source. Your changes are effective immediately.
The Storage overview field displays the local media. Note: The recording performance of the SD card depends on the speed (class) and the performance of the SD card. Bosch recommends an SD card of Class 6 or higher. 2020-11 | draft 0.9 |...
AUTODOME IP starlight 5100i Recording | en Note: For more information about Automatic Network Replenishment (ANR), refer to the White Paper “ANR 2.0 Automatic Network Replenishment (ANR),” available on the product page for your camera. Access the product page on the online product catalog through the appropriate link from https://www.boschsecurity.com/xc/en/product-catalog/.
Page 48
| Recording AUTODOME IP starlight 5100i Stream profile settings Select the encoder profile setting that is to be used with stream 1 and 2 when recording. This selection is independent of the selection for live stream transmission. (The properties of the encoder profiles are defined on the Encoder Profile page.)
AUTODOME IP starlight 5100i Recording | en If the target has not yet been defined, click Configure accounts to jump to the Accounts page where the server information can be entered. Alarm triggers * Select the alarm type that is to trigger an alarm recording: –...
| Recording AUTODOME IP starlight 5100i Click the date you wish to delete. Click OK. The item will be deleted from the table and the window will close. The process must be repeated for deleting additional days. Time periods You can change the names of the recording profiles.
AUTODOME IP starlight 5100i Recording | en – Overwrite: The same file name is always used and any existing file will be overwritten by the current file. – Increment: A number from 000 to 255 is added to the file name and automatically incremented by 1.
| Alarm AUTODOME IP starlight 5100i Alarm Alarm Connections You can select how the camera responds to an alarm. In the event of an alarm, the unit can automatically connect to a pre-defined IP address. You can enter up to ten IP addresses to which the camera will connect in sequence in the event of an alarm, until a connection is made.
AUTODOME IP starlight 5100i Alarm | en Caution! Please note that in some circumstances, a larger bandwidth must be available on the network for additional video images in the event of an alarm, in case Multicast operation is not possible. To enable Multicast operation, select the UDP option for the Video transmission parameter here and on Network Access.
Page 54
A separate Help file provides information about configuring for the VCA settings. Note: Full VCA configuration and Help is only available on the web browser when MPEG ActiveX software from Bosch is installed on your computer. MPEG ActiveX software is available from the Bosch Security Systems DownloadStore (https://downloadstore.boschsecurity.com/) To open the VCA Help in the web browser: Select Configuration >...
Page 55
AUTODOME IP starlight 5100i Alarm | en Notice! A camera calibration is required for all scenarios. Using the scenarios will reset the VCA configuration to the scenario defaults. All values (Metadata Generation and Tasks) can be edited after activating the scenario defaults.
| Alarm AUTODOME IP starlight 5100i Disappearing edges The area selected in the reference image should contain a prominent structure. If this structure is concealed or moved, the reference check triggers an alarm. If the selected area is too homogenous, so that concealing and moving the structure would not trigger an alarm, then an alarm is triggered immediately to indicate the inadequate reference image.
AUTODOME IP starlight 5100i Alarm | en Sensitivity You can use this setting to adapt the sensitivity to the sound environment. You can effectively suppress individual signal peaks. A high value represents a high level of sensitivity. Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. In this way it is possible to notify a recipient who does not have a video receiver.
| Alarm AUTODOME IP starlight 5100i Destination address Enter the e-mail address for alarm e-mails here. The maximum address length is 49 characters. Sender address Enter a unique name for the e-mail sender, for example the location of the device. This will make it easier to identify the origin of the e-mail.
AUTODOME IP starlight 5100i Alarm | en Alarm Outputs Idle state Select Open if you want the relay to operate as an NO contact, or select Closed if the relay is to operate as an NC contact. Operating mode Select an operating mode for the relay.
Page 60
| Alarm AUTODOME IP starlight 5100i – Pre-position: defines a pre-position from shot 1-256. (Note: This option is not available for the input Time range.) – Monochrome: triggers the camera to give the output in monochrome mode. 2020-11 | draft 0.9 |...
Page 61
AUTODOME IP starlight 5100i Alarm | en The table below identifies the Input and Output options and the additional fields that appear depending on the options selected. Field Value Additional Input Additional NOTES field Output field Input Alarm input 1: Input 1...
| Network AUTODOME IP starlight 5100i Network The settings on these pages are used to integrate the device into a network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot. Make the desired changes.
Page 63
AUTODOME IP starlight 5100i Network | en DNS server address 1 / DNS server address 2 The camera is easier to access if the unit is listed on a DNS server. If you wish, for example, to establish an Internet connection to the camera, it is sufficient to enter the name given to the unit on the DNS server as a URL in the browser.
| Network AUTODOME IP starlight 5100i RCP+ port 1756 To exchange connection data, you can activate the unsecured RCP+ port 1756. If you want connection data to be transmitted only when encrypted, select the Off option to deactivate the port.
AUTODOME IP starlight 5100i Network | en Certificates [EAP-TLS] If any certificates are already uploaded at the client level or at the server level, they show here. Click Configure. TCP metadata input TCP port The device can receive data from an external TCP sender, for example an ATM or POS device, and store it as metadata.
| Network AUTODOME IP starlight 5100i 10.4.1 SNMP = Off UPnP Select On to activate UPnP communication. Select Off to deactivate it. When the Universal Plug-and-Play (UPnP) function is activated, the unit responds to requests from the network and is automatically registered on the requesting computers as a new network device.
AUTODOME IP starlight 5100i Network | en 10.5 Multicast The camera can enable multiple receivers to receive the video signal simultaneously. The stream is either duplicated and then distributed to multiple receivers (Multi-unicast), or it is sent as a single stream to the network, where it is simultaneously distributed to multiple receivers in a defined group (Multicast).
Page 68
| Network AUTODOME IP starlight 5100i Mask 1 / 2 Enter the subnet mask for the appropriate IPv4 address. 2020-11 | draft 0.9 | Bosch Security Systems User Manual...
Notice! Potential loss of data Bosch recommends that you save all device configurations, including IVA and calibration, on your network before starting a firmware update. Notice! Before starting a firmware update, make sure to select the correct upload file.
| Service AUTODOME IP starlight 5100i 11.2 Licenses This window is for the activation of additional functions by entering activation codes. An overview of installed licenses is shown. The installation code of the unit is also displayed here. 11.3...
AUTODOME IP starlight 5100i Service | en Logs This section updates automatically with the history of the camera and maintains a log of all events such as those listed below. Click the REFRESH button to reload log data. 11.6 System Overview This window is for information only and cannot be modified.
Playback B, single On/Off IR mode AUX on sets IR to Auto. AUX off sets IR mode off. Available for AUTODOME IP 5000i IR │ AUTODOME IP starlight 5100i IR only. On/Off Night mode IR Filter In/Out On/Off On-Screen Display (OSD) On/Off...
If you cannot control the unit after the firmware upgrade, then cycle the power to the unit. If a power reset does not solve the problem, or if Configuration or video management software identifies the unit as “Videojet Generic,” then contact your Bosch Service Center for an RMA for the unit.
Search again for the IP address. Access the camera using the web browser. Set the initial password for the camera. For AUTODOME IP 5000i │ AUTODOME IP starlight 5000i │ AUTODOME IP starlight 5100i models, the reset button is near the SD card slot. To access the reset button, remove the camera bubble and turn the camera block upside down.
AUTODOME IP starlight 5100i Troubleshooting | en 13.3 Customer Service and Support If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. USA and Canada Telephone: 800-289-0096, option 5 Fax: 800-366-1329 Email: repair@us.bosch.com...
Troubleshooting – Repair & Exchange – Product Security Bosch Building Technologies Academy Visit the Bosch Building Technologies Academy website and have access to training courses, video tutorials and documents: www.boschsecurity.com/xc/en/support/training/ 2020-11 | draft 0.9 | Bosch Security Systems User Manual...
Page 77
AUTODOME IP starlight 5100i Support | Bosch Security Systems 2020-11 | draft 0.9 | User Manual...
Page 78
| Support AUTODOME IP starlight 5100i 2020-11 | draft 0.9 | Bosch Security Systems User Manual...