CYCLE PARTS
5.4.2.
REMOVING THE REAR WHEEL
•
Position the vehicle on the center stand.
•
Set a support under the frame.
•
Remove the exhaust system, see (REMOVING THE
EXHAUST SILENCER).
•
Loosen and remove the two screws.
•
Slide out the rear brake caliper, keep it connected to
the fluid line.
•
Remove the cover.
•
Remove the split pin on the wheel shaft.
•
Remove the nut cover.
•
Loosen and remove the wheel shaft nut.
•
Remove the rear wheel together with brake disc, slide
it out from the right side.
WARNING
Do not operate the front brake lever when the
wheel is not in place or the caliper piston might
come off its housing, thus causing brake fluid
leakage.
5 - 24
SR 50