Zenith Z-171 Series Service Manual page 64

Page
5-2
Configuration
Setup Menu
Previously, the computer's configuration was controlled by hardware jum-
pers and switches on the various circuit boards. Now with the Setup menu,
most configuration information can be programmed into the system with
this ROM-based program. The information that is entered is stored in
the nonvolatile RAM for future use and can easily be altered if the system
configuration changes.
To access the Setup menu, press the clock/calendar icon key to call
up the world map display. Next, press the Setup
(FlO)
key to display
the Setup menu illustrated in Figure 5-2.
CLOCK PRINTER SERIAL PORT
Time: 14:22:00 Type: PARALLEL Baud rale: 1200
Date: 07/05/84 Oala bits:
8
Format: 24 hr.
Stop bits: 1
Time Zone:
19 Parity: None
New York Caracas Handshake: XONIXOFF
DISPLAY MODEM INTERNAL MODEM
Ext. Mono. Adapter: OFF Location: INTERNAL Baud rale: 1200
Data bits: 8
Screen Saver: ON
Parity: None
START-UP
Action: World Map
<SKIP SKIP> CHANGE Syslem version 2.0 EXIT
Figure
5-2:
Setup Menu