Table of Contents
Advertisement
MicroHAWK ID/MV-20 Diffuser and Polarizer Installation
Diffuser Kit Hardware, MicroHAWK ID/MV-20
Qty
Description
1
Kit, Diffuser, MicroHAWK ID/MV-20
Diffuser Kit Installation, MicroHAWK ID-20/MV-20
Step 1: Peel the protective liner from the adhesive on the diffuser.
Step 2: Rest the narrow edge of the diffuser on the bottom edge of the window opening at an angle as
shown below.
Step 3: Center the diffuser left-to-right in the window opening.
Step 4: Affix the diffuser to the window.
Step 5: Run your finger over the surface of the diffuser using light pressure to complete the bond.
Kit Part Number
98-9000077-01
Advertisement
Table of Contents
