Applicable Devices And Device Configuration - Omron Sysmac F430-F Series Connection Manual

5. Applicable Devices and Device Configuration

5.1. Applicable Devices
The applicable devices that can be connected are as follows:
Manufacturer Name
OMRON
OMRON
Note
This document describes the procedure for establishing the communication connection of the
device, and does not describe the operation, installation and wiring method of the device.
For detailed information on the above products (other than communication connection
procedure), please refer to the instruction manual of the product or contact OMRON.
Note
In this document, from among the above target devices, connection confirmation is
performed using the devices listed in section 5.2. When using a device that is not described
in section 5.2. Among the above target devices, check the connection referring to the
contents of this document.
Precautions for Correct Use
In this document, the devices with models and versions listed in section 5.2.
You cannot use devices with versions lower than the versions listed in section 5.2.
To use the above devices with models not listed in 5.2. or versions higher than those listed in
5.2., check the differences in the specifications by referring to the manuals before operating
the devices.
NX Series CPU Unit
Smart camera
Model
NX701-□□□□
NX102-□□□□
NX1P2-□□□□
F430-F□□□□□□□-□□□
Version
Same or
higher
version as
indicated in
section 5.2.
7