Table of Contents
Advertisement
10.10
Event Control
Name
Event Selector
Event Notification [Event Selector]
Event Test Data
Event Action Late Data
Event Frame Trigger Data
Event Exposure Start Data
Event Exposure End Data
Event Frame Start Data
Event Frame End Data
Event Block Discard Data
Event Line 0 Rising Edge Data
Event Line 0 Falling Edge Data
Event Line 2 Rising Edge Data
Event Line 2 Falling Edge Data
10.11
User Set Control
Name
User Set Selector
User Set Load [User Set Selector]
Use Set Save [User Set Selector]
User Set Default
STC-MBS43POE / STC-MCS43POE
Product Specifications and User's Guide
Description
Selects which Event to signal to the host application.
Activate or deactivate the notification to the host application of the
occurrence of the selected Event.
Category that contains all the data features related to the Event Test
generated using the Test Event Generate command.
Category that contains all the data features related to the Action Late
Event.
Category that contains all the data features related to the Frame
Trigger Event.
Category that contains all the data features related to the Exposure
Start Event.
Category that contains all the data features related to the Exposure
End Event.
Category that contains all the data features related to the Frame Start
Event.
Category that contains all the data features related to the Frame End
Event.
Category that contains all the data features related to the Block
Discard Event.
Category that contains all the data features related to the Line0 Rising
Edge Event.
Category that contains all the data features related to the Line0 Falling
Edge Event.
Category that contains all the data features related to the Line2 Rising
Edge Event.
Category that contains all the data features related to the Line2 Falling
Edge Event.
Description
Selects the feature User Set to load, save or configure.
Loads the User Set specified by User Set Selector to the device and
makes it active.
Save the User Set specified by User Set Selector to the non-volatile
memory of the device.
Selects the feature User Set to load and make active by default when
the device is reset.
No.18S112-ES01
64/70
Advertisement
Table of Contents
