Table of Contents
Advertisement
1.5 Controls, Indicators,
and Features of
CombiFlash NextGen
Systems
Figure 1-5 CombiFlash NextGen features (front)
EAR99 Technology Technology Subject to Restrictions Contained on the Cover Page
Figures 1-5 through 1-8 illustrate the controls on the
CombiFlash NextGen unit.
11
8
5
7
3
10
1. Touch Panel LCD display – Large 12 or 15 inch diagonal
High Definition display for system monitoring and control.
2. USB Port – Convenient, front panel port that accepts USB
flash memory drive. A flash drive may be inserted into this
port for transferring files, importing and exporting meth-
ods, and performing system software updates.
3. Adjustable Flash Column Mount – The injection valve
assembly and upper column mount slide along this mount
so the system can accept a variety of column sizes.
4. On/Standby Switch – Push button O
and hold for system shut down.
5. Fraction Collector Arm and Drop Former – The arm
and drop former move to deposit liquid in the collection
tubes.
6. Racks and Collection Tubes – Racks hold the fraction
collection tubes for all CombiFlash systems. Racks
include an RFID tag which the system uses to read the
rack type and collection tube size. The NextGen 100 sys-
tem, however, cannot read the RFID tag.
7. Sample Injection Port – Luer-type fitting to accept the
sample though either a solid load sample cartridge (shown)
or a liquid injection using a syringe or similar device.
8. Solid Load Cartridge Cap (SLCC) Ring Support –
Supports the Solid Load Cartridge (optional).
CombiFlash NextGen Systems
Section 1 Introduction
2
1
12
6
4
/S
. Press
N
TANDBY
1-9
Advertisement
Table of Contents
