Mounting the WS-AO-DS16060 Antenna on a Pole
Note: Refer to
Table 3-4
To mount the antenna to a pole:
1.
Attach the L bracket to the back of the antenna using items 2, 3, and 4 as shown in
Use a tightening torque of 59 kg-cm.
Figure 3-33
Attaching the L Bracket
2.
Attach the grooved bracket to the L bracket using items 2, 3, 4, and 5 as shown in
Do not fasten the screws.
Figure 3-34
Attaching the Grooved Bracket
on page 3-30 for a complete list of items referenced in this procedure.
Enterasys Wireless External Antenna Site Preparation and Installation Guide 3-31
Mounting the Antenna
Figure
3-33.
Figure
3-34.