Table of Contents
Advertisement
Mounting the WS-AIO-DS05120 Antenna on a Pole
Figure 3-11
shows how to mount the WS-AIO-DS05120 antenna on a pole.
components of the mounting kit.
Figure 3-11
Mounting the WS-AIO-DS05120 Antenna on a Mast
Table 3-2 Mounting Kit Components for the WS-AIO-DS05120 Antenna
Item
Quantity
Description
1
2
Hose clamp
2
4
Stainless steel machine screw, #8-32 x 3/8 inch
3
2
MTE bracket
4
4
Plastic wall anchor, #8
5
4
Stainless steel self tap machine screw, #8-18 x 3/4 inch (shown in
page 3-16)
6
4
Stainless steel nylon hex nut, #8-32 (shown in
To install the antenna to a mast:
1.
Locate the MTE brackets (item 3) and two hose clamps (item 1).
2.
Slide the clamp band through the slot in the bracket and place the clamps on the mast at the
desired position, just tight enough to prevent them from sliding.
3.
Align and fasten antenna, MTE brackets and clamps as shown in
machine screws (item 2) and locknuts (item 6) provided.
4.
Tighten hardware securely.
Enterasys Wireless External Antenna Site Preparation and Installation Guide 3-15
Mounting the Antenna
Table 3-2
lists the
Figure 3-12
Figure 3-12
on page 3-16)
Figure 3-11
using the 4
on
Advertisement
Table of Contents
