Table of Contents
Advertisement
Figure 3-13
WS-AIO-2S07060 and WS-AIO-5S12060 Antennas
Mounting the WS-AIO-2S07060 and WS-AIO-5S12060 Antenna on a Wall
To mount the antenna:
1.
Drill two 3/16 inch holes for the pilot hole anchors. Use the template in
holes properly.
Figure 3-14
Mounting Template for the WS-AIO-2S07060 and WS-AIO-5S12060 Antennas
2.
Insert the wall anchors in the pilot holes.
3.
Route the antenna through the back of the mounting bracket. Cable routing options are shown
in
Figure 3-15
on page 3-18.
Enterasys Wireless External Antenna Site Preparation and Installation Guide 3-17
Mounting the Antenna
Figure 3-14
to align the
Advertisement
Table of Contents
