Using The Jack Pigtail (Reverse Polarity Type-N Jack); Plug Pigtail Cable (Reverse Polarity Type-N Plug) Without Lightning Protector; Jack Pigtail Cable (Reverse Polarity Type-N Jack) With Lightning Protector; Plug Pigtail Cable (Reverse Polarity Type-N Plug) Components - Enterasys AP2620 Site Preparation And Installation Manual

Figure 3-77
Table 3-13 Plug Pigtail Cable (Reverse Polarity Type-N Plug) Components
Item
1 Pigtail connection (20-inch) - Plug
2 Lightning protector
3 Low-loss antenna cable
(lengths of 20, 25, 50 or 75 feet)
4 Antenna Pigtail or Antenna Connector

Using the Jack Pigtail (Reverse Polarity Type-N Jack)

Figure 3-78 and
CAB-PT20J) to connect an AP to an outdoor antenna.
Figure 3-78 shows the configuration for using a lightning protector.
configuration when not using a lightning protector.
Figure 3-78

Plug Pigtail Cable (Reverse Polarity Type-N plug) without Lightning Protector

Component
Figure 3-79 show the cable configurations for using a jack pigtail connector (WS-

Jack Pigtail Cable (Reverse Polarity Type-N Jack) with Lightning Protector

1 2
Enterasys Wireless External Antenna Site Preparation and Installation Guide 3-61
1 4
• Reverse Polarity SMA plug to AP
• Reverse Polarity Type-N plug to antenna
• Male body and female center contact
• Reverse Polarity Type-N jack on both ends
• Female body and male center contact
• Reverse Polarity Type-N plug on both ends
• Male body and female center contact
• Reverse Polarity Type-N jack
• Female body and male center contact
Table 3-14 describes the configurations.
3
Connecting Antenna Cables
Connectors
Figure 3-79 shows the
4 5