Switching On The Electronic Timer - AEG COMPETENCE 840 E Operating Instructions Manual

As soon as I am connected to the mains supply (and also after each
power failure), the display in my electronic timer flashes 00.00.
Only when you have set me to the corresponding time of day am
I ready to operate.
- Press knob E [0J, which will retract for operation (but can be
pressed back in if not needed).
- Press buttons A[0)and B0at the same time, hold them in posi¬
tion, and set the actual time of day with my knob E [0].
The time of day appears for you in display F.
- The red triangle above button D El for automatic operation
flashes. It is cancelled by pressing button D.
Only now is my oven ready to operate.
Switching on
the electronic
timer for the
oven only
Setting the
time of day
You shold
also be aware
of the
following