BMW X1 Owner's Manual page 71

Interruption of the opening procedure
The opening procedure is interrupted in the fol‐
lowing situations:
▷ When the vehicle starts moving.
▷ By pressing the button on the outside of the
tailgate. Pressing again closes the tailgate.
▷ By pressing the button on the inside of the
tailgate. Pressing again closes the tailgate.
▷ By pressing the button on the vehicle key.
Pressing again continues the opening mo‐
tion.
▷ By pressing or pulling the button in the stor‐
age compartment. Pulling again continues
the opening motion.
Closing
From the outside
Press the button on tailgate's exterior.
From the inside
Press button in the storage compartment
of the driver's door and keep it pressed.
The vehicle key must be located in the car's inte‐
rior for this function.
An acoustic signal sounds before the tailgate is
closed.
From inside the tailgate
Without Comfort Access:
Press the button on the inside of the tailgate.
With Comfort Access:
Opening and closing
Online Edition for Part no. 01402631131 - X/19
▷ Press button on the inside of the tailgate, ar‐
row 1.
▷ Press button, arrow 2.
The vehicle will be locked after closing the
tailgate. The driver's door must be closed for
this purpose and the vehicle key must be out‐
side of the vehicle in the area of the tailgate.
Interruption of the closing procedure
The closing procedure is interrupted in the fol‐
lowing situations:
▷ If the vehicle starts off with a jerky movement.
▷ By pressing the button on the outside of the
tailgate. Pressing again re-opens the tailgate.
▷ By pressing the button on the inside of the
tailgate. Pressing again re-opens the tailgate.
▷ By releasing the button in the storage com‐
partment of the driver's door. Pulling again
and holding continues the closing motion.
Malfunction
Safety information
Warning
With manual operation of a blocked tailgate, it
can release itself unexpectedly from the block‐
age. There is a risk of injury or risk of damage
to property. Do not operate the tailgate man‐
ually if it is blocked. Have it checked by a deal‐
er's service center or another qualified service
center or repair shop.
CONTROLS
71