BMW X1 Owner's Manual page 202

CONTROLS
In the rear center console
One USB dual charge socket is located in the
rear center console.
Properties:
▷ USB port Type C.
▷ For charging of mobile devices.
▷ Charge current: max. 3 A per connection.
Connecting an external device
Follow the following when connecting:
▷ Do not use force when plugging the connec‐
tor into the USB interface.
▷ Use a flexible adapter cable.
▷ Protect the USB storage device against me‐
chanical damage.
▷ Due to the large number of USB storage de‐
vices available on the market, it cannot be
guaranteed that every device is operable on
the vehicle.
▷ Do not expose USB storage devices to ex‐
treme environmental conditions, such as very
high temperatures; refer to the owner's
manual of the device.
▷ Due to the many different compression tech‐
niques, proper playback of the media stored
on the USB storage device cannot be guar‐
anteed in all cases.
▷ A connected USB storage device will be sup‐
plied with charge current via the USB inter‐
face if the device supports this. At higher
temperatures, the charge current through the
USB storage device may be reduced.
202
Interior equipment
Online Edition for Part no. 01402631131 - X/19
▷ To ensure proper transmission of the stored
data, do not charge a USB storage device via
the onboard socket, when it is connected to
the USB interface.
▷ Depending on how the USB storage device is
being used, settings may be required on the
USB storage device, refer to the owner's
manual of the device.
Non-compatible USB media:
▷ USB hard drives.
▷ USB hubs.
▷ USB memory card readers with multiple slots.
▷ HFS-formatted USB storage devices.
▷ Devices such as fans or lamps.
Wireless charging tray
Concept
The wireless charging tray enables the following
functions to be performed without cables:
▷ Charging the rechargeable battery of a mo‐
bile phone with Qi capability and of other mo‐
bile devices, which support the Qi standard.
▷ Connect the mobile phone to the external an‐
tenna.
Depending on the country, this provides for
better network reception and a consistent re‐
production quality.
General information
When inserting the mobile phone, make sure
there are no objects between it and the wireless
charging tray.
During charging, the surface of the tray and the
mobile phone may become warm. Higher tem‐
peratures may lead to a reduction in the charge
current through the mobile phone, and in iso‐
lated cases the charging process is paused tem‐
porarily. Follow the relevant instructions in the
mobile phone owner's manual.