BMW X1 Owner's Manual page 208

CONTROLS
Cargo area partition net
Cargo area partition net, large
When the rear seat backrest is folded down, in‐
stall the large cargo area partition net behind the
front seats.
1. Fold down the rear seat backrests, refer to
page 206.
2. Open the lids above on the roof frame until
they engage.
3. Insert each of the two top retaining pins of
the cargo area partition net into the recepta‐
cles until they reach the stop, arrow 1, and
push them forward.
4. Hook the lower three hooks of the cargo area
partition net into the three eyes of the folded
down rear backrest, arrow 2, raising the back‐
rests slightly, if needed.
Make sure that the lower hooks are hooked
into the eyes from behind.
208
Interior equipment
Online Edition for Part no. 01402631131 - X/19
Cargo area partition net, small
With upright rear backrests, install the small
cargo area partition net behind the second row of
seats.
1. Remove the cargo cover.
2. Insert each of the two top retaining pins of
the cargo area partition net into the recepta‐
cles until they reach the stop, arrow 1, and
push them forward.
3. Use the two lower hooks to hook the cargo
area partition net into the lower eyes in the
cargo area, arrow 2.
Ski and snowboard bag
The ski and snowboard bag is contained in a
protective jacket in the cargo area.
Follow the installation and owner's manual in‐
cluded in the protective jacket.