BMW X1 Owner's Manual page 153

Switching on/off
Switching on automatically
The system is automatically active after every
driving off.
Switching on/off manually
Press button briefly:
▷ The menu for the Intelligent Safety
system is displayed. The systems
are individually switched off accord‐
ing to their respective settings.
▷ LED lights up orange or goes out respective
to their individual settings.
Adjust the settings as needed. The individual
settings are stored for the driver profile currently
in use.
Press button again:
▷ All Intelligent Safety systems are
switched on.
▷ The LED lights up green.
Hold down button:
▷ All Intelligent Safety systems are
switched off.
▷ The LED goes out.
Setting the warning time
The warning time can be set.
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Intelligent Safety"
4. "Warning time"
5. Select the desired setting.
The selected time is stored for the profile cur‐
rently used.
Online Edition for Part no. 01402631131 - X/19
Safety
Warning with braking function
Display
A warning symbol appears in the instrument
cluster and in the Head-up Display if a collision
with a detected vehicle is imminent.
Symbol Measure
Symbol lights up red: prewarning.
Brake and increase distance.
Symbol flashes red and an acoustic
signal sounds: acute warning.
Brake and make an evasive maneu‐
ver, if necessary.
Prewarning
This warning is provided, for instance when there
is impending danger of a collision or the distance
to the vehicle ahead is too small.
If a prewarning is provided, respond by braking
as warranted.
Acute warning with braking function
An acute warning is displayed when there is an
imminent danger of collision due to the vehicle
approaching another object at a high speed.
The driver must intervene actively when there is
an acute warning. If necessary, the driver is as‐
sisted by a minor automatic braking intervention
in a possible risk of collision.
Acute warnings may be provided even when
there has been no prior warning.
Braking intervention
The warning prompts the driver to intervene.
During a warning, the maximum braking force is
used. This requires the brake pedal to be de‐
pressed sufficiently quickly and forcefully. If there
is a risk of collision, the system may assist with
braking. When the vehicle is traveling at a low
speed, the vehicle may come to a complete stop.
CONTROLS
153