Restrict Internet Traffic By Connection Time - NETGEAR Nighthawk RS700 User Manual

This setting is optional. The router issues a warning when the balance falls below
the volume that you enter. By default, the value is 0 and no warning message is
issued.
12. Select one or more of the following actions to occur when the limit is reached:
• Turn the Internet LED to flashing amber: This setting is optional. When the
traffic limit is reached, the Internet LED blinks amber.
• Disconnect and disable the Internet connection: This setting is optional. When
the traffic limit is reached, the Internet connection is disconnected and disabled.
13. Click the Apply button.
Your settings are saved.
The Internet Traffic Statistics section helps you to monitor data traffic. For more
information, see View the Internet traffic volume and statistics on page 144.

Restrict Internet traffic by connection time

If you connect to the Internet with a session-based connection type, you can record and
restrict traffic by connection time. This is useful when your ISP measures your connection
time.
To record and restrict the Internet traffic by connection time:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Traffic Meter.
The Traffic Meter page displays.
5. Select the Enable Traffic Meter check box.
6. Select the Connection time control radio button.
Manage and Monitor Your
Router
Nighthawk WiFi 7 Tri-Band Router Model RS700
143 User Manual