Schedule When To Block Internet Sites And Services - NETGEAR Nighthawk RS700 User Manual

b. Enter the starting port and ending port numbers.
If the service uses a single port number, enter that number in both fields. To find
out which port numbers the service or application uses, you can contact the
publisher of the application, ask user groups or newsgroups, or search on the
Internet.
9. Select a filtering option:
• Only This IP Address: Block services for a single computer.
• IP Address Range: Block services for a range of computers with consecutive IP
addresses on your network.
• All lP Addresses: Block services for all computers on your network.
10. Click the Add button.
Your settings are saved.

Schedule when to block Internet sites and services

When you schedule blocking, you can use the same schedule to block sites, block
services, or block both. The schedule does not become active until you assign it to site
blocking, service blocking, or both.
To set up a schedule for blocking:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Schedule.
The Schedule page displays.
Control Access to the Internet
Nighthawk WiFi 7 Tri-Band Router Model RS700
72 User Manual