Table of Contents
Advertisement
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5. In the table, select the radio button for the route.
6. Click the Delete button.
The route is removed from the table.
Set up an IPTV port or a bridge for a port
group or VLAN tag group
If you subscribe to an Internet Protocol television (IPTV) service (a TV streaming service)
and your IPTV service requires an intranet address, you can set up an IPTV port.
Some devices, such as an IPTV, cannot function behind the router's network address
translation (NAT) service or firewall. For example, an IPTV port might require an IP
address within the Internet service provider's (ISP's) network (also called an ISP intranet
address).
The way you set up an IPTV port is by creating a bridge connection from the router's
Internet port to the LAN port to which the IPTV device is connected. When IPTV is
connected through WiFi, the router must also support a bridge connection from the
Internet port to the WiFi network. The designated LAN port or WiFi network effectively
becomes an IPTV port with direct access to the WAN without going through NAT.
Based on what your ISP requires for the device to connect to the ISP's network directly,
you can enable the bridge between the IPTV device and the router's Internet port with
or without a VLAN tag.
NOTE: If your ISP provides instructions for how to set up a bridge for IPTV and
Internet service, follow those instruction.
Manage the WAN and LAN
Network Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700
108
User Manual
Advertisement
Table of Contents
