Set A Pppoe Internet Connection - NETGEAR Nighthawk RS700 User Manual

If the NETGEAR website does not display within one minute, see You cannot access
the Internet on page 206.

Set a PPPoE Internet connection

You can manually set the connection settings for a PPPoE Internet service for which you
must log in. Use the information that your ISP gave you to connect to your Internet
service. If you cannot find this information, contact your ISP. Entering incorrect
information might prevent the router from connecting to the Internet.
To set a PPPoE Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Internet.
The Internet Setup page displays.
5. In the WAN Preference section, select one of the following options:
• Internet Port (10 Gbps). Select this option if you connected a modem to the
Internet port on your router. For more information about a high-speed Internet
connection, see About high-speed Internet connections and Internet port
aggregation on page 41.
• Multi-Gig Internet (1 Gbps + 1 Gbps). Select this option if you want to set up
multi-gigabit Internet and use the Internet port together with Ethernet LAN port
4 for your Internet connection. For more information, see Get multi-gigabit Internet
with Internet port aggregation on page 41.
6. In the Does your Internet connection require a login? section, select the Yes radio
button.
The page adjusts.
Specify Your Internet Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700
37 User Manual