Restrict Internet Traffic By Connection Time - NETGEAR Nighthawk RS400 User Manual

Nighthawk AC2300 Cybersecurity WiFi Router Model RS400
• Disconnect and disable the Internet connection. This setting is optional. When
the traffic limit is reached, the Internet connection is disconnected and disabled.
13. Click the Apply button.
Your settings are saved and the router restarts.
The Internet Traffic Statistics section helps you to monitor the data traffic.

Restrict Internet traffic by connection time

You can record and restrict the traffic by connection time. This is useful when your
Internet service provider (ISP) measures your connection time.
To record and restrict the Internet traffic by connection time:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Traffic Meter.
The Traffic Meter page displays.
5. Select the Enable Traffic Meter check box.
6. Select the Connection time control radio button.
Note: The router must be connected to the Internet for you to be able to select the
Connection time control radio button.
7. In the Monthly Limit field, enter how many hours per month are allowed.
Note: The router must be connected to the Internet for you to be able to enter
information in the Monthly Limit field.
8. In the Traffic Counter section, set the traffic counter to begin at a specific time and
date.
9. In the Traffic Control section, enter a value in minutes to specify when the router
issues a warning message before the monthly limit in hours is reached.
Manage Your Router 120 User Manual