Kenwood TM-251A Instruction Manual page 75

1 Press [REV] + POWER ON to enter Menu B.
2 Select Menu No. 50 {page 24}.
e The current Remote Control status appears.
3 Select a status.
e See chart above.
e Default: OFF
4 Exit Menu B.
Note: Remote Control cannot be used if Full Duplex or External
Control via a TH-7 is being used.
68
REMOTE FUNCTIONS USING
MC-45DM/DME
When your transceiver is configured for Front Panel
Remote Control, the keypad can be used to control the
functions as shown in the accompanying diagram.
The keys on the microphone keypad have duplicate
functions of the equivalent buttons on the Front Panel of
the transceiver.
Note:
» To activate the functions shown in the upper third of each
square in the diagram, press [D] first.
>» When VOLUME or SQUELCH are ON, vary the volume and
squeich threshold by pressing [*] and [4].
> Both VOLUME and SQUELCH cannot be activated at the same
time. Only one of the 2 functions can be ON at any time.