KTM F8475S0 2019 Owner's Manual page 119

Main work
–
Place a suitable container under the engine.
–
Remove oil drain plug
S02287-10
–
Remove screw plug
rings.
Info
Do not remove screw
S02288-10
–
Remove screw plug
rings.
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surfaces.
S02289-10
–
Mount and tighten screw plug
the O-rings.
Guideline
Screw plug, oil
screen
S02290-10
–
Position long oil screen
–
Position the pin wrench through the drill hole of the screw plug
in the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
S02291-10
SERVICE WORK ON THE ENGINE 17
1
with the magnet and seal ring.
2
with the short oil screen and the O-
A
.
3
with the long oil screen
2
with the short oil screen and
M20x1.5 15 Nm (11.1 lbf ft)
4
with the O-rings on a pin wrench.
4
and the O-
117