<Return>
Screen
Format
Trend
Duration
PV
Selection
Screens
1 thru 8
PV
Scaling
29
None
PV
PV & Bar Graph
PV & Trend
##
DP, AP, or GP
Pressure
Meter Body Temp
Loop Output
Percent Output
Static Press
PILD Factor
(Optional)
See Note 3 below
None
Convert Units
(Default PV scaling
selection)
Linear
See Note 1 below
Square Root (only
available for DP
transmitters)
See Note 2 below.
ST 800 Pressure Transmitter User's Manual
For calibration, this parameter
allows the user to match the value
displayed on the menus to the units
supported by the user's
calibration equipment.
Select the Screen format from the
list.
Select the amount of historic data
visible on the Trend screen. Range:
1 to 24 hours.
Applies to the "PV & Trend"
format only
Select the Process Variable
(PV) that will be shown this
screen.
Display the PV in the default
units associated with the PV
Selection. Default units:
•
Pressure: inH2O @ 39ºF
•
Meter Body Temp: ºC
•
Loop Output: mA
•
Percent Output: %
•
Static Pressure: psi
Convert the displayed PV to any
pressure unit listed under
Display Units
Display
up to 8
Custom
Units
characters
%
Custom
up to 8
Units
characters
gal/min
gal/h
Display
impgal/h
Units
L/s
L/min
L/h
bbl/h
CFH
SCFM
Press to enter menu
selection
and to select from
list.
to enter
Press to enter menu
selection
and to select
number.
to enter and shift to
next digit
Press to enter menu
selection
and to select from
list.
to enter
Press to enter menu
selection
and to select from
list.
to enter
Custom Units:
and to select
Alphanumeric
to enter and shift to
next char
Revision 15