Table of Contents
Advertisement
Use this mixing when you want to suppress the reaction
pitch operation. Adjust so that the nose does not move in
the rudder direction.
An acceleration function which temporarily increases the
correction rate at throttle stick acceleration/deceleration
operation can be set. The mixing rate at acceleration/
deceleration can be set.
is used, since correction is performed by the gyro, this
to call the setup screen shown below.
Setting method
<Normal condition mixing curve>
the neutral position.
lowered.
throttle is raised and lowered.
＜ Model Menu (Helicopter) ＞
189
mixing is not used. If this function is used when
the gyro operation mode is the AVCS mode, the
neutral position will change.
<Idle up condition mixing curve>
each condition used.
<Acceleration function setting>
which can be caused by sudden operation of
the throttle stick.
deceleration can be set independently. When
performed.
Advertisement
Table of Contents
