Ti300U, Ti400U, Ti401U, Ti480U
Users Manual
Replace Lenses
Additional IR inspection applications can be supported with optional telephoto and wide-angle lenses.
For details on how to install or replace a lens, see
To replace optional lens:
1. Push and hold the buckle on the side of the Imager's lens cover.
2. Rotate the lens cover counterclockwise.
3. Pick up the optional lens to be installed, push down the buckle on the side of the lens, and align it
with the lens mount of the Imager.
4. Rotate the optional lens clockwise; The optional lens is installed, when you hear a click.
42
1
3
Figure 18. Replace a Lens
Figure
18.
2
4