Ti300U, Ti400U, Ti401U, Ti480U
Users Manual
You can also add annotation to the saved thermal files in the Gallery.
This section describes the steps for adding voice/text/tag annotation to thermal image files on the
screen freeze interface.
You can add annotations to the saved thermal image files in the Gallery in a similar
way.
Voice Annotation
You can add voice annotation to thermal image files. Add an annotation to a thermal image file by
recording voice information through a connected Bluetooth headset or the Imager's microphone.
To add a voice annotation:
1. In the screen freeze interface, push
2. Select Voice Annotation.
F2
3. Push
4. After recording a voice, push
F1
5. Push
F3
6. Push
7. After recording, push
voice to a thermal image file.
36
Figure 14. Add a Voice Annotation
(Record) to start recording.
F2
(Play) to play the recorded voice.
(Close/Delete) to delete the currently recorded voice and record again.
F3
(Close/Delete) to close the voice annotation interface and save the
Note
F2
(Edit) to enter the Edit menu.
(Stop) to stop recording.