Palettes; Settings - Fluke Ti300U User Manual

Palettes

Use the palette function to select Palettes.
The Imager provides Grey, Iron10, Iron, Rainbow, Grey10, GreyRed, MidGrey, Yellow, Rain, and
supports inverted palettes.

Settings

The System Settings menu mainly contains some system settings of the Imager itself, such as
language and time, temperature and measurement units, communication options, storage options,
and also device information, such as serial number, software and hardware version. This menu can
also be used to restore the Imager to its factory settings if necessary.
Item
Display Screen brightness
Settings
Image Overylay
Connection Bluetooth
Table 15. Settings Menu
Option
Adjust the brightness of the screen backlight.
Set the information displayed on the Home screen. The
information that can be set includes:

Global maximum temperature

Global minimum temperature

Global average temperature

Emissivity

Reflection Temperature

Ambient Temperature

Humidity

Distance

Line trend
Push the Bluetooth button to enter Bluetooth sub-menu. Tap
shows in yellow. Then tap Headset, select the Bluetooth headset
or other Bluetooth device that can be searched to complete the
pairing of Bluetooth devices.
It is disabled by default.
Description
The emissivity shown at the bottom right of the screen
is the full-screen emissivity. Refer to
Measurement Region (ROI)
on the touch screen. When Bluetooth is enabled, the button
Thermal Imagers
Note
Temperature
for ROI emissivity.
System Menu
31