Table of Contents
Advertisement
Ti300U, Ti400U, Ti401U, Ti480U
Users Manual
Item
Select ROI
Display Settings
The Imager can add up to 16 movable spots, up to 12 ROIs (including rectangles or
circles), and up to 8 movable lines.
Add a ROI
•
In the ROI menu, tap the option to be added.
The corresponding ROI is added directly in the center of the screen.
•
Draw an ROI on the corresponding region in an image. The method for drawing a ROI varies
slightly depending on the tool selected, as shown in
Tool
Add
Rectangle
Add Circle
Add Line
Add Spot
ROI Operation
After a ROI is established, a series of actions can be performed on the ROI:
Select an ROI
1. In the Temperature Measuring Tools menu, tap Select ROI and a list of all current ROIs is shown.
2. Swipe up and down in the ROI selection area to select the ROI to be adjusted.
F1
3. Push
The selected ROI is highlighted.
The Edit option shows at the bottom of the screen.
Move an ROI:
22
Select an appropriate ROI.
It is used to select to display or hide the maximum temperature, the minimum
temperature, average temperature and/or emissivity of the ROI on the screen.
Tap to automatically add a rectangular ROI is to the image area, which is also marked with
control points at its four corners. Tap another position in the thermal image, and the control
point marks of the rectangle disappear, indicating that the rectangle is not currently
selected.
At the same time, the default name of the ROI is shown, which is in the form "Ar+number",
where the number refers to the serial number of the rectangular ROI.
Tap to automatically add a oval ROI is to the image area and an oval ROI is created.
The name of the oval ROI is prefixed with Ci.
Tap to automatically add a temperature curve to the image area.
The name of the temperature measurement line is prefixed with Li.
Tap to add a cross mark to the thermal image.
The name is prefixed with Sp.
(Select).
Description
Note
Table
Table 12. Draw a ROI
Methods
12.
Advertisement
Table of Contents
