Using Other Lenses; Viewing Camera And Battery Information - Fluke TiR2 User Manual

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55
Users Manual

Using Other Lenses

Your Camera comes standard with an f 0.8 20-mm focal length lens, which is
appropriate for most applications. The lens is made of Germanium crystal and
is antireflection coated for high transmission in the 8 to 14 micron wavelength
band. Two additional lenses are available: a wide angle f 0.8 10.5-mm focal
length lens to capture larger targets at short distances and a narrow angle f 1.0
54-mm focal length lens to capture small targets at long distances.
When you change lenses, you must change the lens selection setting
accordingly as described in Chapter 6. Ensure proper alignment when
connecting the standard 20-mm lens. See Chapter 5, Using Image Alignment
for more information.
For more information on ordering additional lenses or other accessories, visit
www.fluke.com.

Viewing Camera and Battery Information

The Info tab within the Camera Info window contains a list of key features
such as IR refresh rate, IR image size (in pixels), zoom capabilities, IR-
Fusion® capabilities, camera serial number, software versions, lens
descriptions of each lens used (if more than one), calibration range, number of
image files on the memory card, and the used and free space on the memory
card.
To view the Info tab information:
1. Tap F.
2. Use the mouse controller to position the pointer over Camera Info on the
popup menu and tap E.
3. Position the pointer over the Info tab and tap E.
4. Position the pointer over the up/down arrows to scroll and see additional
details.
5. Tap to return to scan target mode.
info@Fluke-Direct.com
8-2
Fluke-Direct
.com
1.888.475.5235