Table of Contents
Advertisement
1. Tap the upper and/or lower limit temperature values as needed to make the background gray (for
example
).
2. Slide the scroll wheel on the right side of the screen to adjust the corresponding upper and/or
lower limit.
•
When the background of upper limit temperature values is gray and the lower limit value has
no background color, you can adjust the upper limit and the lower limit remains unchanged.
•
When the background of lower limit temperature values is gray and the upper limit value has
no background color, you can adjust the lower limit and the upper limit remains unchanged.
•
When the background of the upper and lower limit are gray, the upper and lower limits can be
adjusted simultaneously.
Humidity
The Imager can compensate for the local effects of air humidity on thermal radiation transmission.
Therefore, it is necessary to set the humidity correctly.
To set Humidity:
1. Select Humidity.
2. Slide the screen up and down to set the Humidity percentage to the actual humidity value;
F3
3. Push
(Last) to return to the previous menu, or push
In the case of short distances and normal humidity, the humidity is usually set to the
default value of the Imager.
Figure 13. Adjust temperature span manually
F3
Note
Thermal Imagers
System Menu
(Cancel) to exit the menu.
29
Advertisement
Table of Contents
