1-3. Opening, closing and locking the doors and trunk
Switching the door unlock function
■
It is possible to set which doors the entry function unlocks using the wireless remote
control.
Turn the "POWER" switch OFF.
STEP
1
When the indicator light on the key surface is not on, press and
STEP
2
hold
holding
The setting changes each time an operation is performed, as shown below. (When
changing the setting continuously, release the buttons, wait for at least 5 seconds,
and repeat step 2.)
Multi-information
display
40
,
, or
for approximately 5 seconds while pressing and
.
Unlocking doors
Hold the driver' s door handle
to unlock only the driver' s
door
Hold a passenger' s door han-
dle to unlock all the doors
Hold the door handle to
unlock the front and rear
doors on your side
Hold the door handle to
unlock the door
Hold a door handle to unlock
all doors
Beep
Exterior: Beeps 3 times
Interior: Rings once
Exterior: Beeps 4 times
Interior: Rings once
Exterior: Beeps once
Interior: Rings once
Exterior: Beeps twice
Interior: Rings once