Lexus GS 450h 2008 Owner's Manual page 380

3-7. Other interior features
STEP 2
STEP 3
Repeat the steps above to program another device for each of
STEP 4
the remaining HomeLink
378
Press and hold one of the buttons
on the HomeLink
on the transmitter. When the indi-
cator light on the HomeLink
changes from a slow to a rapid
flash after 20 seconds, you can
release both buttons.
Test the

HomeLink
programmed button.
If programming a garage door
opener, check to see if the garage
door opens and closes. If the
garage door does not operate, see
if your garage transmitter is of the
Rolling Code type. Press and hold
the programmed HomeLink
ton. The garage door has the roll-
ing code feature if the indicator
light (on the HomeLink
rapidly for 2 seconds and then
remains lit. If your transmitter is the
Rolling Code type, proceed to the
heading "Programming a rolling
code system".

buttons.

and the button
operation of
by pressing the newly


) flashes

the
but-