Lexus GS 450h 2008 Owner's Manual page 381

Hide thumbs Also See for GS 450h 2008:

Table of Contents

Programming a Rolling Code system (for U.S.A. owners)

If your device is Rolling Code equipped, follow the steps under the

heading "Programming the HomeLink

steps listed below.

Locate the training button on the ceiling mounted garage door

opener motor. The exact location and color of the button may

vary by brand of garage door opener.

Refer to the operation manual supplied with the garage door opener

for the location of the training button.

Press the training button.

Press and release the vehicle' s programmed HomeLink

twice. The garage door may open.

If the garage door opens, the programming process is complete. If the

door does not open, press and release the button a third time. This third

press and release will complete the programming process by opening

the garage door.

The ceiling mounted garage door opener motor should now recognize

the HomeLink

Repeat the steps above to program another rolling code system

for any of the remaining HomeLink

transceiver and operate the garage door.

3-7. Other interior features

" before proceeding with the