Table of Contents
Advertisement
3)
Press qw to switch the displayed screen and display [WIRELESS LAN] (page 4/5).
f The QR code is displayed.
Note
f The [WIRELESS LAN] page in [NETWORK STATUS] screen is not displayed in following cases.
g When the optional Wireless Module (Model No.: AJ-WM50 Series) is not attached to the <USB> terminal.
g When the [NETWORK] menu → [WIRELESS LAN] is set to [DISABLE]
r Operation of a smartphone
1)
Start application software of the camera supporting reading of a QR code.
2)
Read the QR code displayed in the OSD with the camera.
3)
Tap the notification displayed on the smartphone screen.
f Tap "Join" or "Connect" if a message to confirm the connection is displayed.
f The smartphone will be connected to the projector via wireless LAN.
220 - ENGLISH
Chapter 5 Operations — Network connection
NETWORK STATUS
WIRELESS LAN
SSID
Proj1234_xxxxxxxxxxxxx
KEY
AUTHENTICATION
ENCRYPTION
CHANGE
RETURN
MENU
4/5
********
WPA2-PSK
AES
DISPLAY KEY
ENTER
Advertisement
Table of Contents
