Table of Contents
Advertisement
Deleting the registered test pattern
1)
Select the [TEST PATTERN] menu, and press the <ENTER> button.
f The [TEST PATTERN] screen (list format) is displayed.
2)
Press as to select [USER TEST PATTERN 1], [USER TEST PATTERN 2], or [USER TEST PATTERN 3],
and press the <ENTER> button.
f The test pattern and the [TEST PATTERN] screen (toggle selection format) are displayed.
3)
Press the <ENTER> button again.
f The [USER TEST PATTERN] screen is displayed.
4)
Press as to select [DELETE USER TEST PATTERN], and press the <ENTER> button.
f The confirmation screen is displayed.
5)
Press qw to select [OK], and press the <ENTER> button.
f The selected test pattern is deleted.
Note
f For the procedure to delete the user test pattern from the web control screen, refer to "Deleting the registered user test pattern"
(x page 232).
Changing the name of the test pattern
1)
Select the [TEST PATTERN] menu, and press the <ENTER> button.
f The [TEST PATTERN] screen (list format) is displayed.
2)
Press as to select [USER TEST PATTERN 1], [USER TEST PATTERN 2], or [USER TEST PATTERN 3],
and press the <ENTER> button.
f The test pattern and the [TEST PATTERN] screen (toggle selection format) are displayed.
3)
Press the <ENTER> button again.
f The [USER TEST PATTERN] screen is displayed.
4)
Press as to select [RENAME USER TEST PATTERN], and press the <ENTER> button.
f The [RENAME USER TEST PATTERN] screen is displayed.
5)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 16 single-byte alphanumeric characters can be entered.
6)
After the name is entered, press asqw to select [OK], and press the <ENTER> button.
f The registration is completed and the [RENAME USER TEST PATTERN] screen returns.
Note
f For the procedure to change the name of the user test pattern from the web control screen, refer to "Changing the name of the user test
pattern" (x page 232).
194 - ENGLISH
Chapter 4 Settings — [TEST PATTERN] menu
Advertisement
Table of Contents
