Sony Handycam Video8 CCD-TR410E Operation Manual page 55

Set the selector to VIR (DC OUT)
and disconnect the mains lead.
After about one minute, try again.
The POWER lamp does
not light. _
io
The CHARGE lamp See the following chart.
flashes.
When the CHARGE Lamp Flashes
Check through the following chart.
Remove the battery pack from
the AC power adaptor.
Install the same
battery pack again.
If the CHARGE lamp flashes
again, install another battery
pack.
The CHARGE lamp lights up.
The CHARGE lamp flashes.
If the CHARGE lamp lights up and
goes out after a while, the battery pack
is operating correctly.*
If the CHARGE lamp goes out after a
while, the problem is with the battery
pack firstly installed.
The problem is with the AC power
adaptor.
Please contact your nearest Sony dealer.
uoneW FeUOR
eUOIDI UO}eU
55