IBM 5225 Operator's Manual page 4

Pref2ce
This publication is a guide for operating the IBM 5225 Printer Models 1, 2, 3, and
4. Although this publication is for all operators, it is intended especially for the
inexperienced operator of computer equipment. The operating procedures are
presented in an easy-to-follow format. A procedure for solving printer problems is
included.
The information is presented in six chapters:
o
Chapter 1, "Introduction," introduces the operator to the operation of the
printer, and includes some suggestions for caring for the printer.
o
Chapter 2, "Printer Controls," identifies the operator's panel, the Power
switch, the forms controls, the customer access panel, and describes the
purpose of each.
o
Chapter 3, "Loading and Unloading Forms," describes how to load, adjust,
and unload fonns (paper).
Chapter 4, "Replacing the Ribbon and Ribbon Shield," describes
how to change the ribbon and the ribbon shield.
o
Chapter 5, "Operating Procedures," explains how to prepare the printer for
operation, operate the printer, and recognize its status.
o
Chapter 6, "Solving Printer Problems," gives a problem recovery procedure,
and includes a checklist of items to be recorded if service becomes necessary.
Additional information about using this printer can be found in:
Forms Design Reference Guide for Printers, GA24-3488
o
IBM 5225 Printer Models I, 2, 3, and 4, Setup Instructions, GA34-0085
o
Publications for the computer system (host) to which the printer is connected
Requests for copies of these publications should be made to your IBM represen-
tative, or the IBM branch office serving your locality.
Preface
iii